Motorola A1000 disassembly

Motorola A1000 disassembly

If you require a new screen, phone cover and screwdrivers, they can be purchased in any Motorola Customer Service Center.

Tools required: T5 screwdriver

• Turn your phone over so the camera is facing you and remove the battery cover and battery. Then remove the 8 screws (circled below). You can now separate the back of the housing from the rest of the phone.

• Once you have removed the back of the housing, you'll see 2 more screws. Remove these. You can now remove the front part of the housing from the main body of the phone.

• Your phone should now look like the image below.

• Carefully remove the keyboard interface from he main board of the phone.

• Your phone should now look like the image below. Carefully unclip the connector (circled below) from the main board. You should now be able to lift the screen from the main board.

• With the screen removed, the job is nearly finished. There are five clips around the screen which need to be removed (two of them are circled below)

• You should now have the screen separated, as below

Reverse the procedure for disassembly and it's finished.

Read more »

Motorola C200 Exploded View

Motorola C200 Exploded View

When dismantling any phone, great care should be taken to ensure that no damage is caused to any of the parts. Rough handling may result in severe damage of many parts, and if proper anti-static procedures are not followed, electrostatic damage may result in any electronic component.

Before commencing, it is recommended that the correct tools are purchased for the job in hand - at the very least, you will require a Torx T6 screwdriver.

Please remember that this is an exploded view, and not a step by step guide - however, so long as you're careful, take your time and follow the diagram carefully you shouldn't have too many problems.

Read more »