Motorola 8200 Secrets Codes

Motorola 8200

Activate RBS

(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the keys, and enable it.

De-activate RBS

To de-activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok]
This only works with some versions of software.

These countries has been reported working:

ES, AU, NL, BE

What's the use of RBS:

Get Distance From Base Station - Place a call, when it is answered, press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.

Get Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.

Pin Outs

Numbered right to left, keypad up, battery down looking

1. Audio Ground
2. V+
3. True data (TD) (input)
4. Downlink - Complimentary data (CD) (input)
5. Uplink - Return data (RD) (output)
6. GND
7. Audio Out - on/off
8. Audio In
9. Manual Test - ???
10. Battery Feedback
11. Antenna connector

Read more »

Ericsson SH888 Secrets Codes

Ericsson SH888
*#06# for checking the IMEI (International Mobile Equipment Identity)

>*<<*<* for checking the firmware revision information (software release) >*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language.

>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.

>*<<*<*>>> IR version info. if pressing yes you can check the phones IR device's driver version.

The Service Provider (SP) Lock
The Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.

To activate/deactivate this lock one needs a special secret code that is not available to the end user.

Here is how to activate the menu:

<**< Lock to Network? if pressing yes you have 5 attempts to enter NCK.

<**<< Lock to Network subset? if pressing yes you have 5 attempts to enter NSCK.

Warning: Your phone can be locked to a service provider FOREVER by doing this! If an invalid code is entered all five times, the menu will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock Menu will result in the response "Not allowed"! However the NCK/NSCK lock can be recover through a direct clearing in the EEPROM.

Shortcut for Last Dialed call menu
If you for some reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following key stroke instead: First '0' then '#'.

Bat. level indicator when turned OFF
When the phone is turned off and the phone is not changing - the bat. level can be seen for a short period of time by pressing the 'NO' key quick once (it has to be quick!) and then wait for about 2 sec. The bat. level will now be shown in the display at its normal position.

Access menu without Sim card
To access to the menu in your phone without having a card inside do the following: type **04*0000*0000*0000# When display say "Wrong Pin" press NO and you have access to the all menus: Info, Access, Settings, Calculator, Clock, Keylock On?, Mail, Phone book. NOTE if you try this on your phone may stop at Keylock On? menu and you´ll have to take your battery out to turn the phone on again.

Here is Ericsson phone secrets codes.If you need this code just download it.

Read more »

Ericsson GA628 Secrets Codes

Ericsson GA628

*#06# for checking the IMEI (International Mobile Equipment Identity)

*#0000# to reset the phones menu-language to English.

*#103# then YES Time and date will be shown.

>*<<*<* for checking the firmware revision information (software release) >*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language. (298 entries)

>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language. (160 entries?)

The Service Provider (SP) Lock
The Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.

To activate/deactivate this lock one needs a special secret code that is not available to the end user.

Here is how to activate the menu:

<**<> key for a second or two The option Menu size turns up Choose 'yes' and go from there.

An alarm clock turned up too but it never rang. I think this was because there is no clock in the phone.

Free phone calls using the GA628
This trick has only been reported working on PREPAID GSM CARDS and in some countries and with some sw versions.

The prepaid GSM SIM CARD is a kind of "SIM card" which only has a sertant amount of credit on it (like a normal phonebox telecard)... if it can be traced? - we don't know...

Well..here's the trick you dial the no. normally and press YES. While "connecting" is shown on the screen, the following procedure should be carried out: Press CLR then 0 then # and then NO (twice) so as to switch OFF the phone. You can then still speak on the phone while it is switched off but the SIM card does not record your calls which will lead to FREE phone calls in some countries.. we hope!!

Another variant of the code
Make a Call, while the phone says Connecting type 083# (the position 83 must be empty! ), when phone says Pos Emtpy, press the NO key and turn off the phone.

If you can make the call with the phone turned off you will face a problem when you need to hang up the phone...the only way for you to do that is remove the battery...???

Main PCB rear:Here is 3 main section like Transmitter, receiver, and analogue/digital processing.The rightmost section contains the main processor, flash program memory (1MByte), working RAM (32Kbytes), plus the signal processing circuitry required to interface to the RF (transmitter and receiver) and analogue (speech) sections. The red device top-right is the SIM, a smartcard chip containing the user identity.
Main PCB front:8KByte memory device left-centre holds user's stored numbers and option settings. Gold pads on right half of board are keyboard contacts.
The Flash program memory is 128Kbytes - substantially less than the digital unit, which uses a great deal more software signal processing.
Now you can repair any kind of Ericsson GA628 phones using codes and see its main board.

Read more »

Ericsson DH368, GF768, A1018s Secrets Codes

Ericsson DH368, GF768, A1018s

Ericsson DH368

Try these Codes on your DH-368 phone:

1. Power on.
2. Press 904059 + 'MENU'
3. 'TEST SET' display ...
4. Press 'YES' will display @ then press 1 'RCL' will turn light off and you will see 'DONE'
5. Press 'YES' will display @ then press 86 'RCL' display 'DONE' also you will hear static... You can just enter the channel number (up to 1023) by pressing 'Yes' 3 'CLR' XXXX - channel number to enter a channel directly. You can also see the signal level on channel by pressing 3 'MENU'. You can see the ESN number by pressing 'YES' 1 'RCL' 96 in HEX format.
6. Press 3 to exit, now you phone will power down and power up again. You can install the phone number into the phone by pressing 923885 + 'MENU'

Ericsson GF768

Edit Greetings Tip

1. Go to the Keylock menu.
2. Set lock to Auto.
3. Press YES then hold the left arrow untill the Greetings menu appears.

GF788 menu in your GF768 phone! (1)

1. Go to the EDIT MENU and press YES.
2. Type the number "2" and press YES.
3. In "NAME" HOLD DOWN the "2" key untill the number "2" apperars. Press YES.
4. Press YES again (to save any position) then QUICKLY press and hold left arrow (<) untill "SIZE" appears in the display. 5.Press YES and choose "Full size". You now have the GF788 menu! NB. Confirmed working on version 970716 and 980318. GF788 menu in your GF768 phone! (2) 1.Go to MissedCall 2. Empty the list 3. Press the -> key for a second or two
4. The option Menu size turns up
5. Choose 'yes' and go from there

NB. Confirmed working on version 990122.

GF788 menu in your GF768 phone! (3)

1. Go and set the ring volume and press yes.
2. When 'STORED' is displayed - keep the right button -> pressed until 'Extended Menu' is displayed.
3. Select "Activate" the menus and you now have lots of extra features

NB. Confirmed working on version 980910

Ericsson A1018s

(UN)LOCKING YOUR ERICSSON A1018s TO SPECIFIC NETWORK :

A way to (un)lock your cell phone on to the network:

1. Press : <**<
2. Then on the display appear and give you two choices: Lock to Network ? and Lock to Network subset?
3. Enter the NCK number (code is provided by the SP)
4. You have 5 attemps to do this
5. Then your cell phone will work 'only' with the network

Read more »

Mitsubishi Secret code for mobile

Mitsubishi Trium

*#0000# to reset the phones menu-language to natural language, set initially by the distributor.

*#06# for checking the IMEI (International Mobile Equipment Identity)

hold * then 5806 - show software version
hold * then 5807 - a littel bit diffrent
hold * then 5472 - Testmode for datacable (it seems so)
hold * then 4329 - Activate and deactivate NETMONITOR
hold * then 621342 - Activate and deactivate another NETMONITOR
hold * then 3926 - shutdown

SP lock
You can turn around the lock routin by entering **04*PIN*PIN*PIN# now
the secretcode change was applied and the software turns back to main
menue. It works not on all triums, only on thos with older sofware
versions.

Mitsubishi MT- D30
Secret Codes

Monitor mode: Hold C and press 379
Secret menu: Hold C and press 987
Version number: Hold C and press 597
Phase1 and 2 : Hold C and press 499
Warm start : Hold C and press 179
Instant turn off: Hold C and press 999
Unlock menu: Hold C and press 787090

Here is some Mitsubishi secret codes for Mitsubishi mobile phone.This is important code for all Mitsubishi mobile phone.You can see Monitor mode,Version number,Phase1 and 2,Warm starInstant turn off,Unlock menu in your phone.Using this code checking your software version and all kind of application.

Read more »

BOSCH mobiles secrets codes

BOSCH 718
BOSCH 738
BOSCH COM 607

*#3262255*8378# to enter in the secret Engineering menu

10. Engineering
10.1 MS Info
10.1.1 on
10.1.2 off
10.2 Software details
10.2.1 Software version
10.2.2 EEPROM version
10.2 Test / Production details
10.3.1 Hardware data
10.3.2 Production data
10.3.3 Service data
10.3.4 Mechanical data

*#06# to display the IMEI (International Mobile Equipment Identity)
*#0000# to set the language automaticaly (Reset to english)
*#3370# to set the Enhaced Full Rate
#3370# to Reset the phone
*#9000# to enter sim lock code
*#9003# to enter the network code
*#9004# to enter the subset code
*#9100# to removing the sim lock permanently
*#9101# to removing the corporate lock permanently
*#9102# to removing the provider lock permanently
*#9103# to removing the network lock permanently
*#9104# to removing the subset lock permanently

Here is all Bosch phone code.You can use this code in your Bosch mobile.

Read more »