Ericsson 318 and 338 secrets code

Ericsson 318/338

To view IMEI number *#06#To view Software Version enter -> * <- <- * <- * CLR (Use with Care) The Latest Software Version is under Phone Info. To fine tune sound and clean up any echos, place the 388 into the car kit HF 2600. Then close all windows, engine off and type * # * # 3. The E 388 will fine-tune itself in about a few seconds. To activate operator lock <- * * <- (This locks the phone to one carriers SIM card - Use with lots of care) Press Yes to lock and No to notlock. You can also use the codes below to undo this function. USE AT OWN RISK I have tested the function Lock to SP... At least on the 337 there's a submenu: Enter SPCK-code. There are 5 attempts, which is showed (05 attempts). At final attempt the phone beeps as a warning, 'this is the final try', when entering the menu... Wrong code exits the menu, so you are not stuck in something... When you have tried to enter the code (wrong) all five times, the menu is deactivated, and you'll get: 'Not allowed' when entering <-**<- Accessing the Service Program that is not provided with the 388. 1. Connect the 388 to Cable with RS232/TTL converter. 2. Set Comport to 9600bps, 8 data, 1 stop, no parity. 3. Power ON, wait for "2" and send "0B" to the phone. DO NOT Press ENTER. 4. R should be on screen. 5. Send TEST.BIN. (Send as a binary file) 6. 388 should answer "SP,OK". 7. R should be on screen. DO NOT write or read from the IMEI or SPCK area! If you try that you can send the phone to service at once, because you will automatically write FE or EF to EVERY cell in the EEPROM. In other words, all the calibration values for the radio is overwritten... (NOT good) Some commands in the ServiceProg: eere read from eeprom eewe write eeprom lime xxxx xxxx xxxx xxx Learn imei no. Returns Error. imei - Displays IMEI number To FlashProgram a 388: 1. Connect the 388 to Cable with RS232/TTL converter. 2. Set Comport to 9600bps, 8 data, 1 stop, no parity. 3. Power ON, wait for "2" and send "OB" to the phone. DO NOT Press ENTER. 4. R should be on screen. 5. send pre_xxx.bin to the MS. 6. You should recieve a ">".
7. send "0B" again.
8. R should be on screen
9. send prodload.bin to the MS.
10. recieve ">".
Done, I don't have the above files so please don't ask for them.
Interesting Informating (well I thought so :)
The names on the files, sj.....X45 tells you a couple of things. "sj" stands for Sofia-Jane, thats the internal name for the model and x45 stands for "sub-model". The 388 is called model 4/5. The latest 337 phones is called "cr", like in Cost Reduction. They rebuilt the oscillator from a bought-in to one built up with discrete components and that was cheaper.
Programming Channel Indicator or RBS
To enable, send the following command:
EEWR 3EE 1
Wait for the OK prompt, power off* the phone and disconnect it from the interface cables. Powerup and browse through the menus.
To diasable, send the following command:
EEWR 3EE 0
Clearing Electronic Lock
To clear the electronic lock you have to clear the EEPROM address range 03CF to 03DA by sending the commands:
EEWR 3CF 00
EEWR 3D0 00
EEWR 3D1 00
EEWR 3D2 00
EEWR 3D3 00
EEWR 3D4 00
EEWR 3D5 00
EEWR 3D6 00
EEWR 3D7 00
EEWR 3D8 00
EEWR 3D9 00
EEWR 3DA 00
COOL STUFF TO DO
Set ComPort to 115200bps, 8 data, 1 stop, no parity and watch all the phone commands on the screen and so on. Make a call and see what happens as well as shutting down.
*POWER OFF
You should press the NO button a few times until Shut Down comes up on the screen, when it does press yes and this will shut down the phone properly.
Reading the Channel Info now that's it's enabled
|-------|-------|-------| D

| | | | I

| 1 | 2 | 3 | S

|-------|-------|-------| P

| | | | L

| 4 | 5 | 6 | A

|-------|-------|-------| Y
1. This is three different channels things depending on the phone state.



a. When the phone is idle, this shows "Bxxx". "B" stands for "Broadcast channel" (a logic GSM channel)b. When a phonecall is in progress, this shows "Sxxx". S stands for "Stand Alone Dedicated Control Channel" SDCCH for short.
c. When the phoncall in up, this shows "Txxx". "T" Stands for Traffic channel. The "xxx" thing is the channel number, 1-124.
2. This shows Rx Level. The values displayed is from 0 to 63. Rx Level is a indicator on how good your reception is for the moment. 0 is a signal strength of -110dBm. 63 is approx -45 to -50dBm.RXLEV is measured in dBm in such a way that incoming signal equals -110.5+RXLEV so that a RXLEV at 50 equals an incoming signal strenght at -50.5 dBm (plus or minus max deviation 0.5dBm)
3. This shows the output power in dBm.
4. This shows the timeslot used for the moment. You can see it when making a call.
5. This shows Rx Quality. Rx Quality is a measurement of how much error correction is required to the speech. 0 indicates none and as the figure rises you hear more pings and pongs on the speech as large parts of the frame are missing. If you have more RxQ then 5, you are on good way to loose your call. RxQuality reads 0-7.RXQUAL is measured by using a table wereas the biterrorrate or BER is interesting and measured in %
RXQUAL table
0 BER < follows="1,11*TA/2." 5v="External" 0v="Battery" 5v="POWER" 0v="POWER" 0v="normal,+5V="test," 12v="test+flash" sec =" POWER"> * <- <- * <- * To read all programmed texts enter -> * <- <- * <- * ->

To view phone network lock status enter < * * < (wait 3 sec)

To fast dial press phone number pos nr and # (Example: 1 5 #)

To fast dial last number press 0 #

To reset main menu language to english enter * # 0 0 0 0 #

To see battery level while phone is turned off quickly press and release on/off(NO button).

To see Extended menus (on older versions) go to MISSED CALLS, empty directory, press and HOLD right arrow button, choose menu type

To see Extended menus (on newer versions) go to READ, empty directory, press and HOLD left arrow button, choose menu type

To edit phone book Turn on extended menus and choose "EditPh.Bk".
Command set
The following commands are recongnized by the phone.Use 9600 baud, 1 stopbit, 8 data bits, no parity.

ATA Pick up phone during ring
AT+GMI Manufacturer identification
AT+GMO Request model Identification
AT+GMR Request revision Identification
AT+GMM
ATDxxx; Dial number xxx
ATH Hangup phone
AT+CFUN=? Define levels of fuctionality in the order of power consumed
AT+CFUN=0 Switches off the phone
AT+CBC Query battery level

Each command has to be followed by a 0x0A, 0x0D sequence, that is carriage return - line feed. These commands will be ackowledged with an 'OK' prompt. An
incoming call is signalled by the string 'RING' sent by the phone at 9600b in normal mode.
Portable Handsfree Unit
1 Earphone: 16 Ohm
2 Microphone: <- 2 kOhm
5 Connected to 04 (GND)
Pinouts
Left to right, keyboard up.
1 Audio Out

2 Audio In

3 Accessory Sense. GND to enable External Mic and Speaker (Analog)

4 Audio Signal GND.

5 Portable handsfree In.

6 Music Mute Out, High when phone is used.

7 In Flash Memory Voltage and Service Voltage, In 0V=normal,+5V=test, +12V=test+flash

8 Logic Out, Status On. Sources over 100mA

9 Data Out from Mobile Station. Debug messages appear here at 112KBaud when in debug mode.

10 Digital Ground and DC return

11 Data in

12 DC in for battery charging, DC out for accessory power

Read more »

All mobile phone GSM codes

All mobile phone GSM codes:

The following codes are the standard GSM codes for various network services. Most Nokia phones have easier ways to activate them through the menus. Check the guides for your model.

Call Diverting

All
To Activate: * * 21 * NUMBER # [SEND]
To Cancel: # # 21 # [SEND]
To Check: * # 21 # [SEND]
No Answer
To Activate: * * 61 * NUMBER # [SEND]
To Cancel: # # 61 # [SEND]
To Check: * # 61 # [SEND]
Unreachable
To Activate: * * 62 * NUMBER # [SEND]
To Cancel: # # 62 # [SEND]
To Check: * # 62 # [SEND]
Busy
To Activate: * * 67 * NUMBER # [SEND]
To Cancel: # # 67 # [SEND]
To Check: * # 67 # [SEND]
To Cancel All Call Forwarding # # 002 # [SEND]

Diverting Data Calls

All
To Activate: * * 21 * NUMBER * 25 # [SEND]
To Cancel: # # 21 # * 25 [SEND]
To Check Status: * # 21 # * 25 # [SEND]
No Answer
To Activate: * * 61 * NUMBER * 25 # [SEND]
To Cancel: # # 61 * 25 # [SEND]
To Check Status: * # 61 # * 25 # [SEND]
Unreachable
To Activate: * * 62 * NUMBER * 25 # [SEND]
To Cancel: # # 62 # * 25 # [SEND]
To Check Status: * # 62 # * 25 # [SEND]
Busy
To Activate: * * 67 * NUMBER * 25 # [SEND]
To Cancel: # # 67 # * 25 # [SEND]
To Check Status: * # 67 # * 24 # [SEND]

Diverting Fax Calls

All
To Activate: * * 21 * NUMBER * 13 #[SEND]
To Cancel: # # 21 # * 13 # [SEND]
To Check Status: * # 21 # * 13 # [SEND]
No Answer
To Activate: * * 61 * NUMBER * 13 # [SEND]
To Cancel: # # 61 * 13 # [SEND]
To Check Status: * # 61 # * 13 # [SEND]
Unreachable
To Activate: * * 62 * NUMBER * 13 # [SEND]
To Cancel: # # 62 # * 13 # [SEND]
To Check Status: * # 62 # * 13 # [SEND]
Busy
To Activate: * * 67 * NUMBER * 13 # [SEND]
To Cancel: # # 67 # * 13 # [SEND]
To Check Status: * # 67 # * 13 #[SEND]

Call Barring

Before you can activate these barring services you will need a barring code from your service provider. Call Barring can not be activated if Call Forwarding diverts are already in use.

All Calls
To Activate: * 330 * BARRING CODE # [SEND]
To Cancel: # 330 * BARRING CODE # [SEND]
To Check: * # 330 # [SEND]
All Outgoing Calls
To Activate: * 333 * BARRING CODE # [SEND]
To Cancel: # 333 * BARRING CODE # [SEND]
To Check: * # 333 # [SEND]
All Incoming Calls
To Activate: * 353 * BARRING CODE # [SEND]
To Cancel: # 353 * BARRING CODE # [SEND]
To Check: * # 353 # [SEND]
All Outgoing Calls
To Activate: * 33 * BARRING CODE# [SEND]
To Cancel: # 33 * BARRING CODE # [SEND]
To Check: * # 33 # [SEND]
All Outgoing International Calls
To Activate: * 331 * BARRING CODE# [SEND]
To Cancel: # 331 * BARRING CODE # [SEND]
To Check: * # 331 # [SEND]
All Outgoing International Calls Except To Home Country
To Activate: * 332 * BARRING CODE# [SEND]
To Cancel: # 332 * BARRING CODE # [SEND]
To Check: * # 332 # [SEND]
All Incoming Calls
To Activate: * 35 * BARRING CODE # [SEND]
To Cancel: # 35 * BARRING CODE # [SEND]
To Check: * # 35 # [SEND]
All Incoming Calls When Outside Home Country
To Activate: * 351 * BARRING CODE # [SEND]
To Cancel: # 351 * BARRING CODE # [SEND]
To Check: * # 351 # [SEND]
Canceling All Call Barring # 330 * BARRING CODE # [SEND]

Call Waiting

To Activate: * 43 # [SEND]
To Deactivate: # 43 # [SEND]
To Check: * # 43 # [SEND]

Calling Line Identity

Outgoing
To Activate: * 31 # [SEND]
To Deactivate: # 31 # [SEND]
To Check: * # 31 # [SEND]
Incoming
To Activate: * 30 # [SEND]
To Deactivate: # 30 # [SEND]

Read more »

Sony Secrects Codes

Sony Cdmx 1000 Secret Codes:

Show Software date Following procedure will show on your phone the software date. Remove your SIM Card, then press:

* # 06 #

and finally press:

[left softkey]

To enter Monitor Mode on Network Option menu
1. Menu 9 (Phone Options)
2. 7 (Phone Status)
3. [Left Display Button] (left MENU key)
4. 7684666
5. [HangUp Button] (Red HandSet key)

The Service provider (SP) lock is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.

Sony Cmd -Z1 Secret Codes:

To view IMEI (International Mobile Equipment Identity) number enter *#06#

Show Software version and manufact. date Following procedure will show on your phone the software version in first row of the display and some CPU and OS info on the second and third one. # 8377466 # (#version#)

On earlier version the above tip may not work, but you can try this one:
In the menu go to PHONE SETTINGS
Jog down to: FACTORY SETTINGS and CLICK ONCE
You will see a display "Factory Setting Yes No" . Don’t do anything with this display, leave it as it is.
Move the main switch of the phone briefly to the right (briefly means long enough to secure a short electric contact BUT short enough not to switch off the phone!)
Now you key in the following sequence:
# * 0 4 Will display info about sw (?)

The Service provider (SP) lock is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.

Sony C1 Secrets Codes:

The Service provider (SP) lock is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.

Remove SP lock (For advanced users only)
Just edit your eeprom and at the address 16b-1D8 fill this address with 00.

enter codes from normal network screen, when you press the last # it will show the sim data, and network lock status, as for the language selecets, when you press the last #, the phone will return to the normal network screen using a different language

*#7465625# - display sim information (use to check eeprom editing worked)
*#0001# set language to english

Read more »

Mobile phone GSM Codes

GSM Codes:

The following codes are the standard GSM codes for various network services. Most Nokia phones have easier ways to activate them through the menus. Check the guides for your model.

Call Diverting

All
To Activate: * * 21 * NUMBER # [SEND]
To Cancel: # # 21 # [SEND]
To Check: * # 21 # [SEND]
No Answer
To Activate: * * 61 * NUMBER # [SEND]
To Cancel: # # 61 # [SEND]
To Check: * # 61 # [SEND]
Unreachable
To Activate: * * 62 * NUMBER # [SEND]
To Cancel: # # 62 # [SEND]
To Check: * # 62 # [SEND]
Busy
To Activate: * * 67 * NUMBER # [SEND]
To Cancel: # # 67 # [SEND]
To Check: * # 67 # [SEND]
To Cancel All Call Forwarding # # 002 # [SEND]

Diverting Data Calls

All
To Activate: * * 21 * NUMBER * 25 # [SEND]
To Cancel: # # 21 # * 25 [SEND]
To Check Status: * # 21 # * 25 # [SEND]
No Answer
To Activate: * * 61 * NUMBER * 25 # [SEND]
To Cancel: # # 61 * 25 # [SEND]
To Check Status: * # 61 # * 25 # [SEND]
Unreachable
To Activate: * * 62 * NUMBER * 25 # [SEND]
To Cancel: # # 62 # * 25 # [SEND]
To Check Status: * # 62 # * 25 # [SEND]
Busy
To Activate: * * 67 * NUMBER * 25 # [SEND]
To Cancel: # # 67 # * 25 # [SEND]
To Check Status: * # 67 # * 24 # [SEND]

Diverting Fax Calls

All
To Activate: * * 21 * NUMBER * 13 #[SEND]
To Cancel: # # 21 # * 13 # [SEND]
To Check Status: * # 21 # * 13 # [SEND]
No Answer
To Activate: * * 61 * NUMBER * 13 # [SEND]
To Cancel: # # 61 * 13 # [SEND]
To Check Status: * # 61 # * 13 # [SEND]
Unreachable
To Activate: * * 62 * NUMBER * 13 # [SEND]
To Cancel: # # 62 # * 13 # [SEND]
To Check Status: * # 62 # * 13 # [SEND]
Busy
To Activate: * * 67 * NUMBER * 13 # [SEND]
To Cancel: # # 67 # * 13 # [SEND]
To Check Status: * # 67 # * 13 #[SEND]

Call Barring

Before you can activate these barring services you will need a barring code from your service provider. Call Barring can not be activated if Call Forwarding diverts are already in use.

All Calls
To Activate: * 330 * BARRING CODE # [SEND]
To Cancel: # 330 * BARRING CODE # [SEND]
To Check: * # 330 # [SEND]
All Outgoing Calls
To Activate: * 333 * BARRING CODE # [SEND]
To Cancel: # 333 * BARRING CODE # [SEND]
To Check: * # 333 # [SEND]
All Incoming Calls
To Activate: * 353 * BARRING CODE # [SEND]
To Cancel: # 353 * BARRING CODE # [SEND]
To Check: * # 353 # [SEND]
All Outgoing Calls
To Activate: * 33 * BARRING CODE# [SEND]
To Cancel: # 33 * BARRING CODE # [SEND]
To Check: * # 33 # [SEND]
All Outgoing International Calls
To Activate: * 331 * BARRING CODE# [SEND]
To Cancel: # 331 * BARRING CODE # [SEND]
To Check: * # 331 # [SEND]
All Outgoing International Calls Except To Home Country
To Activate: * 332 * BARRING CODE# [SEND]
To Cancel: # 332 * BARRING CODE # [SEND]
To Check: * # 332 # [SEND]
All Incoming Calls
To Activate: * 35 * BARRING CODE # [SEND]
To Cancel: # 35 * BARRING CODE # [SEND]
To Check: * # 35 # [SEND]
All Incoming Calls When Outside Home Country
To Activate: * 351 * BARRING CODE # [SEND]
To Cancel: # 351 * BARRING CODE # [SEND]
To Check: * # 351 # [SEND]
Canceling All Call Barring # 330 * BARRING CODE # [SEND]

Call Waiting

To Activate: * 43 # [SEND]
To Deactivate: # 43 # [SEND]
To Check: * # 43 # [SEND]

Calling Line Identity

Outgoing
To Activate: * 31 # [SEND]
To Deactivate: # 31 # [SEND]
To Check: * # 31 # [SEND]
Incoming
To Activate: * 30 # [SEND]
To Deactivate: # 30 # [SEND]

Read more »