Nokia 2160 coding

Nokia 2160 :

NOKIA 2160 SERIES CELLULAR TELEPHONE NAM PROGRAMMING INSTRUCTIONS

The Nokia 2160 series hand portable CMT uses an EEPROM NAM that can be
programmed directly from the standard user keypad. In order to access the
NAM, you must enter the special access code currently programmed into the
phone. Once the programming mode is accessed, NAM parameters are loaded
by entering them into the display and "storing" them to selected memory
locations. Be sure to obtain all parameters before proceeding.

EASY NAM PROGRAMMING

1. Turn on phone.

2. Enter the Easy NAM access code. Access code is: *#639#

3. Verify the display now reads "Cellular Number" and enter the 10 digit
MIN for the phone.

4. Press the softkey under the word "OK" in the display. If less than 10
digits are entered an error message will prompt you to reenter the
number.

5. Verify the display reads "Enter code" and enter the five digit SID
followed by four zeros. (Example 001750000 is a SID of 175 followed
by four zeros). An error message will display if an incorrect entry
is made. Do not add more than four zeros to the code.

Note: Change the Lock code by adding a pound sign and new lock code after
the code. (Example: 001750000#7788. Lock code = 7788).

Change the Language code by adding a pound sign (#) and new
language code after the code. (Example: 001750000#2. Language = 2)

Language Code: 0 (default) = English, 1 = French, 2 = Spanish,
3 = Portuguese

Change the Lock code and Language code by separating each set of
numbers by a pound sign. (Example: 001750000#7788#2). The SID =
00175, Lock code = 7788, Language = 2 (Spanish).

6. Press the softkey under the word "OK" in the display.

7. The display will tell you that the activation was OK and instruct you
to power the phone off, then on again. When the phone powers back up,
it will automatically select the correct system (A or B).

ACCESS NAM PROGRAMMING MODE:

1. Turn the phone on.

2. Enter the NAM access code. Factory default is: *3001#12345

3. Enter softkey [MENU].

4. If this screen appears, you have entered the access code correctly:
____________
| Field Test |
| >NAM 1 |
| NAM 2 |
|____________|

SELECTION FROM THE MAIN LEVEL MENU (FIRST LEVEL OF NAM MENU):

5. Press the scroll key up or down repeatedly until the desired main menu
selection is displayed. Select from:

NAM 1 NAM 2 NAM 3
Serial No. Programmed Field Test

Security Code Emergency Number SW Version

6. Press softkey [SELECT] to access the second level menu for your main
menu selection.

PROGRAMMING NAM's 1 THROUGH 3 (SECOND LEVEL OF NAM MENU):

7. Press the key up or down to scroll through the selected NAM
information list. Select from:

HOME SYSTEM OWN NUMBER PSID/RSID LISTS (Note 1) CHANGE DEFAULTS

"CHANGE DEFAULTS"

NAM STATUS ACCESS METHOD LOCAL OPTION PRIMARY PAGING CH

SECONDARY PAGING CH DEDICATED CCH A DEDICATED CCH A NBR DEDICATED CCH B
DEDICATED CCH B NBR OVERLOAD CLASS GROUP ID ROAMING STATUS
A-KEY

8. If the value is incorrect, press softkey [SELECT] and use the numeric
keypad or key to make any needed changes.

9. Enter softkey [OK] to save the value.

10. Repeat steps 7 through 9 for the remaining NAM info items to be viewed
and/or changed.

11. To program other NAM's, press [QUIT] to return to the Main Level Menu
list. Select NAM 2 or NAM 3. Once the Home System ID and Own number
are programmed, the phone will automatically set the NAM Status to
enabled.

PROGRAMMING THE SECURITY CODE:

12. From Main Level Menu use the key to select the "Security" menu, press
[SELECT] and the current 5-digit security code will appear in the
display. Default is 12345.

13. If you wish to change the Security code at this time, use the numeric
keys to change the value.

14. Press the softkey [OK] to store changes.

PROGRAMMING EMERGENCY NUMBERS:

15. From Main Level Menu use the scroll key to select the "Emergency"
menu. Press softkey [SELECT] to enter the emergency numbers.

EMERGENCY NUMBER 1 (911) EMERGENCY NUMBER 2 (*911)
EMERGENCY NUMBER 3 (None)

16. If you wish to change the displayed value, use the numeric keys to
make changes. Use the scroll key to select the emergency number you
wish to change and press [SELECT].

17. To save the value, press softkey [OK].

18. Press [QUIT] to exit the menu.

SW VERSION:

19. From the Main Level Menu use the scroll key to display the "SW
version" menu, press [SELECT] to view software version, date and
product type.

20. Press [QUIT] to exit the menu.

SERIAL NUMBER (ESN):

21. From the Main Level Menu, use the scroll key to display the "Serial
No." or ESN of the phone.

22. Press [QUIT] to exit the menu.

PROGRAMMED: (DATE THE PHONE IS FIRST PROGRAMMED)

23. From the Main Level Menu, use the key to display the "Programmed" menu.

24. Press [SELECT] and enter a four digit number that corresponds to the
month and year the phone is sold. Example (mmyy) 0197 = January 1997,
0996 = September 1996.

Note: This menu location can be programmed only one time. Once the date
has been entered it cannot be changed. Any attempt to enter the
menu once it has been programmed will receive a short beep and the
message "DATE ALREADY STORED".

EXITING NAM PROGRAMMING:

25. To exit the NAM programming mode, turn the phone off and leave it off
for five seconds.

FIELD TEST:

26. The FIELD TEST MODE is used to investigate how the phone is reacting
to the cellular system. The FIELD TEST information covers signal
strength, battery charging, cellular state and encryption status. The
information is organized to display information relating to Analog
Control Channels, Digital Control Channels, Analog Voice Channels and
Digital Voice Channels. All the information provided in the FIELD
TEST display is in accordance with IS-136.

For further information about the FIELD TEST mode, contact Nokia
Customer Service at 1-800-456-5553 and ask for Nokia Field Service
Bulletin ?????.

27. To activate the FIELD TEST mode you must be in NAM programming.
Instructions for entering NAM programming are listed above. Use the
following steps to enable the FIELD TEST mode.

28. From the main menu use the scroll key to display the "FIELD TEST" menu
and press the softkey [SELECT]. Use the key to select ENABLE and
press the softkey [OK].

29. Turn the Nokia 2160 off then back on. Once the power up self test is
complete, the FIELD TEST display will begin automatically. Scroll
through the different displays using the scroll key.

30. To disable the FIELD TEST mode, return to NAM programming and disable
the function under the FIELD TEST menu.

PROGRAMMING PSIDS AND RSIDS:

The Nokia 2160 provides the option to program Private (PSIDs) and
Residential (RSIDs) System ID's as prescribed by IS-136. The PSID/RSID
list is programmed to support selection/reselection processes, system
selection, and SID display functions. Programming the PSID/RSID list is
part of the NAM programming menu. All three NAMs have their own PSID/RSID
list. Follow these instructions to program the PSID/RSID lists.

1. Enter the NAM programming menu and select NAM 1 (or the desired NAM).
(NOTE: PSID/RSID is currently only available in the NAM 1 location.
PSID/RSID is included in NAM 2 and 3 for future use.)

2. Use the scroll key to display "PSID/RSID LISTS" and press [SELECT].

3. Use the scroll key to select the P/RSID 1 or the desired P/RSID (1
through 5). Press the [SELECT] softkey.

4. Each list contains:

System type Select Private or Residential system type.

PSID/RSID System ID for the Private or Residential system.
Indicates which PSID/RSID the mobile will respond
to.

System ID Connected System ID. The SID the PSID/RSID is
connected to.

Alpha Tag The name of the Private or Residential SID.

Operator Code(SOC) This is the System Operator code. (US-McCaw
Cellular = 001 (dec), Canada-Rogers Cantel Inc.
= 002 (dec) and McCaw Cellular Communications (for
international) = 2049 (dec).

Country Code Enter the country code of the PSID/RSID.